Flexible LED Arrays with Turn SignalsUse them as brake/running/turn signals, third brake lights on fenders, trunks, TourPaks, trikes and more.4 pre-made lengths to fit just about any motorcycle trunk or Tour Pak.** NOTE** Can be flexed in an arc as if to wrap around a paint can. CAN NOT be bent in smiley or frown face direction.Features:- Available with Red, Clear, or Smoked lens- Features Red brake and Amber or Red turn signals- 120 degree viewing angle for wider visibility- Flexible "D" channel tube that is only .325" thick by .325" wide- Industrial strength double sided mounting tape on back- 24 gauge teflon coated wire leads that are 2 feet long- Input voltage of 12-15 Volts DC- Brake light portion of the light bar illuminates at 1/2 brightness as Running Light and then Full brightness as BrakeInstallation:- Installs easily with supplied double sided 3M tape (attached to back of fixture at factory).- Adhesion Promoter Pad is specifically formulated to be used with 3M Acrylic Foam Tape. Prepares surface for a trouble free, long lasting adhesion- Installation instructions included.- 4 wire hook-up. Wires exits out the back of one end cap. Drilling of small hole required.-Will NOT work on '05 - '08 Hammer, Jackpot, Vegas, and Kingpin or other Victory models with 2-3 volt taillights.Lengths and sizes:- 8.0" has 15 LED Turns (1.8" long) and 30 LED Brake (3.6" long)- 9.8" has 20 LED Turns (2.4" long) and 35 LED Brake (4.2" long) - 11" has 20 LED Turns (2.4" long) and 45 LED Brake (5.4" long)- 14.7" has 25 LED Turns (3.0" long) and 65 LED Brake (7.8")